|
By
Virus1824 - For Beginners
Hi, this is my first tutorial ever so don't flame me if it
sux ;)
since i'm utterly very bored i decided to help the people
who aren't familiar with scanning a bit.
This tutorial covers the basic options and actions of
Languard scanner, it is not ment for adcanced hackers and
such.
introduction
First of all get Languard from
http://www.gfi.com/downloads/downloads.asp?pid=8&vid=1&lid=1
When u got languard installed and u have 1 IP or a IP range
to scan you're ready to go. First we will cover the basic
options u may need.
options
First goto "scan-options", Then u will enter a menu with
various options such as timeouts retries Netbios scans ect.
Goto "scanning" u will find a list of things u can scan,
such as netbios etc, i suggest u turn all the options on,
and set the port scanning delay to 2000 (ms) anymore is
useless. Also turn on "read banners".
Next you'll see "gathering information" and beneath that
are:
-operations to be performed
-list of ports to be scanned
We will leave "operations to be performed" for now and
focus on "list of ports to be scanned". on the right u see
a pictogram next to ports to be scanned, click on it.
When u do that u'l see a list of ports the program scans
for when u scan a IP.
U can add ports, delete em turn em on or off.
Lets add a new port for the program to scan shall we?
on the right u will see a menu with:
-port number
-port description
and some options u can turn on and off such as
-is a trojan port
-read banner
Port number defines the port the program scans while doing
its sweep, the port description is the description of the
port like port 27374-description:
Subseven server. The last 2 speak for themselves.
Now lets add a new port.
in port number type: 3500
in port description type: some weird trojan, then turn on
"is a trojan port"
and "Read banner", then click on "add port" and "save
changes" and ure done.
u can add as many ports as u want too, and turn em on or
off.
Scanning
now when u configured the options ure ready to scan an IP.
on the main menu u will see pictograms like a play button
and such. click on the pitcogram that looks like a paper.
When u did that a menu will popup that will ask if u want
to scan only 1 computer or a range of computers. Simply make
ure choice enter the ip and click Finish. then on the far
left click on the play button and it will begin its sweep.
When its done u will see netbios exploit (if the computer
has 1) and open ports and much more information which u can
use.
This Tutorial was ment for the newbies of the scanning
world veterans wont learn anything from this tutorial, this
tutorial is for educational purposes only damage to
computers or such are not my fault and never will be i
claim no responsibility whatsoever.
If u publish it on a site its oke with me as long as my
name is in the credits and this txt file isn't altered. Also
tanx to Stubby for correcting me with spelling errors :)
Credits:
2002, Virus1824 |